Welcome to Associated Wire Rope & Rigging .
Sockets
Tailgrip Open Wedge Socket With Bolt and Nut
Specifies the bolt-and-nut version of the Tailgrip OWS series. Supporting the same 13 to 121 USton range, this datasheet provides the technical parameters for the secure retention system, ensuring the wire rope tail is properly managed during high-load operations.
High-Security Wire Rope Control: Patented Tailgrip Wedge Sockets with Bolt & Nut
The Tailgrip Open Wedge Socket with Bolt and Nut (OWS-TG-B) is a premium wire rope termination solution engineered for maximum safety and rotational security. It combines a patented wedge-style clamping mechanism with a heavy-duty bolt and nut fastening system to prevent unintended pin release in high-vibration environments. The integrated tailgrip design provides superior control of the rope’s dead end, ensuring structural stability for critical lifting and rigging applications.
Ultimate Material Strength & Quality Assurance
- Premium Cast Steel: Manufactured from high-grade quenched and tempered cast steel to deliver exceptional fatigue resistance and durability under extreme industrial loads.
- Certified Traceability: Every socket is supplied with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate for complete industrial compliance.
- Robust Load Range: Standard configurations support a Minimum Breaking Load (MBL) from 13 UStons up to 121 UStons.
- Corrosion Protection: Finished with a specialized blue primer coating and hot-dipped galvanizing (Note: OWS-TG 0.5 B model is galvanized only).
Precision Field Engineering & Security
- Integrated Tailgrip Security: Features a specialized tail clamping system (Dimension TH) that secures the dead end of the rope, preventing wedge release or slippage.
- Bolt & Nut Fastening: Replaces standard pins with a secure bolt and nut assembly to ensure the connection remains locked during permanent or high-vibration rigging.
- Broad Compatibility: Precision-machined to accommodate wire rope diameters from 3/8″ to 1-1/4″.
- Controlled Manufacturing: Maintains a strict ±5% dimensional tolerance for both the jaw opening (W) and pin diameter (øP).
Tailgrip Open Wedge Socket (Bolt & Nut) Technical Specifications
Below is a selection of technical specifications for the OWS-TG-B series. Please contact our technical team for full dimensional details (A, B, C, E, TH, WH, WB, WD) and MBL verification based on your specific requirements.
⚠ Safety Warning: Always adhere to the Minimum Breaking Load (MBL) and ensure that all wire rope terminations are conducted by certified personnel. Note that surface finishes like hot-dip galvanizing or paint may slightly increase overall thickness and jaw dimensions; always verify fit-up on site. Refer to the comprehensive safety documentation on pages 136-149 for full maintenance and installation procedures.